Takeoff Metering in Jectors
We are engaged in manufacturing and exporting an extensive range of Takeoff Metering in Jectors which is machined by our trained and experienced professionals as per the set domain parameters and quality guidelines. Using quality approved raw materials and components, these Takeoff Metering in Jectors are designed in different specifications to suit the requirements of our clients. Resistant to rust & corrosion, dimensionally accurate and sturdy in construction, these Takeoff Metering in Jectors are offered to our clients at reasonable prices.
Construction and working:
The TAKE OFF Metering injectors are made of Zinc Pressure Diecasting. The TAKE OFF Metering Injectors Works on a different principle unlike the normal metering injectors which discharges the oil when pump is ON. In this case when the pump is ON;the TAKe OFF injectors are charged and the spring loaded piston ejects out thereby indicating TAKE OFF injectors are charged. When the pump stop the oil is flushed out of the injectors to the lubricating points and the piston goes back. A non return valve in each injector does not allow oil to go back.
Technical Specifications:
Working Pressure : 5 to 30 kg/cm2
Viscosity of oil : 20-500 cst.
Model |
DMT - 002
(No. of outlets - 2)
|
DMT - 003
(No. of outlets - 3)
|
|
|
Dosage in cc
|
0.1
|
0.2
|
0.3
|
0.4
|
0.1
|
0.2
|
0.3
|
0.4
|
0.2
|
0.3
|
0.4
|
|
Dosage in Drops
|
3
|
6
|
9
|
12
|
3
|
6
|
9
|
12
|
6
|
9
|
12
|
|
Area in cm2
Min./ max.
|
20/40
|
40/65
|
65/100
|
100/150
|
20/40
|
40/65
|
65/100
|
100/150
|
40/65
|
65/100
|
100/150
|
|
